How to Hang Glass Beaded Wallpaper

How to Hang Glass Beaded Wallpaper
with Information and Installation Instructions
Please read before installing glass bead wallcovering
Safety Notice: Wear goggles and gloves
Prior to Installation:

• Examine each roll to be sure the product is what was ordered. All rolls must have the same production number. Hang in sequence as cut from bolt. No adjustment or claim will be considered because of variation in color or shading once material has been cut.
• The Paperhanger assumes full responsibility when he/she cuts the wallpaper supplied. Positively no allowance for cut rolls and claims for labor will NOT be entertained.
• Carefully Inspect the installation after applying three strips before proceeding. If, at any time during the installation, a discrepancy occurs, stop. Contact the designer or innovations before proceeding.
• Avoid folding or creasing that may create markings on the product.
• Material should be hung with the same top - not reversed.
• Material is not pre-trimmed.

Wall Preparation:

• Proper wallpaper preparation is essential. Generally walls must be smooth and clean. Wallcoverings will not adhere well to dirt, soap or grease. Clean the walls with household detergent or with a solution of six parts water to one part ammonia and rinse with clean water.
• It is recommended to remove all old wallcoverings.
• Always turn off the electricity and remove any switch plates, wall fixtures, outlet plates, etc., before you begin to hang the paper.
• When applying wallpaper over plaster walls, always smooth out any rough spots with a sander and fill any holes or cracks with patching plaster or spackling compound.
• Always apply wallcovering primer prior to installation. This ensures an even surface for the wallpaper to adhere making it easier to hang and remove later on.
• Apply a single coat of pigmented sealer on new and unpainted walls followed by wallcovering primer or sizing, such as Romans R-35 or Zinsser Shields Plus

Wall Application:

• Trim glass beaded wallcovering on the table, not on the wall.
• Trim from back with a paper hanger's straight edge cutting only the backing material, not attempting to cut through the glass beads. Once the backing material is cut, the selvage or excess can then be pulled away like a zipper and discarded. It is not necessary that this line be absolutely straight.
• Apply professional grade pre-mixed clear vinyl adhesive.
• Use a new blade after each cut.
• Use a soft bristle brush after trimming with a single edge razor blade.
• A wooden seam roller is recommended for the seams.
• Small gaps may be present and is part of the installation. Seams will be visible and placement of seams and joints should be worked into the architecture.
• Let any excess paste dry. Then dried paste may be flaked off with a vinyl sweep or terry cloth.
• Surface of glass beads can be wiped with a cloth dampened with a clear Windex or other clear glass cleaner.
• The non-woven backing for the wallcovering is highly flexible and can be installed on both inside and outside corners. In situations where there is a tight corner or surface that is not square create a template.

How To Hang Wall Mural

Prior to Installation:

 

• Carefully Examine this merchandise for color, condition, quantity and quality BEFORE Cutting and Hanging, as claims cannot be allowed after goods are cut.

• The Paperhanger assumes full responsibility when he/she cuts the wallpaper supplied. Positively no allowance for cut rolls and claims for labor will NOT be entertained.

Wall Preparation:

 

• Proper wallpaper preparation is essential. Generally walls must be smooth and clean. Wallcoverings will not adhere well to dirt, soap or grease. Clean the walls with household detergent or with a solution of six parts water to one part ammonia and rinse with clean water.

• It is recommended to remove all old wallcoverings.
• Always turn off the electricity and remove any switchplates, wall fixtures, outlet plates, etc., before you begin to hang the paper.
• When applying wallpaper over plaster walls, always smooth out any rough spots with a sander and fill any holes or cracks with patching plaster or spackling compound.
• Always apply wallcovering primer prior to installation. This ensures an even surface for the wallpaper to adhere making it easier to hang and remove later on.

Wall Application:

 

• This mural does not come with paste as it has been discontinued. You will need to use a clear non-staining adhesive, diluted with 10% water.

• Measure up the mural against your wall. Take into consideration where furniture will be placed. The motif has been selected so that the mural can be cut both in the width and height without losing any of its effect.
  - For example, if your wall is 30cm short in width, cut 1 5cm off of the left and right side. Remember that it will stretch by 1% approximately when wet.
• Now spread paste liberally on panel #1 according to the sketch; allow setting for at least one minute before applying the panel to the wall. Handle with care when wet to avoid any damage, and do not fold panel.
• When panel is correctly lined up, press out air bubbles with a clean wallpaper brush or dry cloth, working from the center outwards. Small air bubbles will disappear when the mural has dried out.
• Wipe off any surplus paste from the panel surface with a soft damp cloth.
• Prepare panel #2, and apply to the bottom of panel #1. Overlap panel #1 by approximately 2mm evenly along the horizontal edge. Be sure to align panel #2 exactly.
• Panel #3 overlaps right of panel #1 by about 2mm. Repeats for remaining panels
  and the job is done!
  • 
    The above instructions refer to normal wall surfaces using clear non-staining adhesives, at room temperature. For difficult or wall surfaces and extreme climate conditions consult your local painter or wallpaper dealer for best paste to use.
  • 
    All normal wall covering paste can be used with Design Your Wall murals. The manufacturer's instructions must always be carefully followed.

Flooring

Flooring Ideas Traditional, Contemporary, or Casual. Whatever style you have in mind, we have galleries of flooring ideas to inspire you to achieve the look you want. So many design choices, how will you decide? Look around and get great flooring ideas for your home ,office ,Madrasah ,school, Musolah or Masjid


 
 Carpet



Laminate Floor

HOME SWEET HOME WITH FRESH AND GREEN DECORACTION

Style In A Snap

Discover how you can improve your home that's easy on any budget. One way to improve the look of your home is by display a collection of cushion in identical ways or different sizes.

To have the new look  you may consider these ideas:

Fashionable & Meaningful Wall Decal

Thinking of transforming your dull looking wall into art?

You don’t have to pay an artist to do that job for you. By using your innate artistic talent, we can turn your walls into a work of art! Put on some Revolutionized Wall Decalsand you will be amazed! Revolutionized Wall Decals are quick, easy and affordable to every home transformation. It gives your walls a total make over in just a few minutes.

Revolutionized Wall Decals by Beyond Unlimited Imagination are…

The latest technology in wall and surface finishing. It gives unrestrained methods of enhancing your wall and surface with artistic style and DIY ease. Beyond Unlimited Imagination offers self-adhesive wall decals that are manufactured locally in Malaysia with high quality matte vinyl imported from US.

These wall decals and wall stickers are easy enough to install by yourself, and even more fun to install with your spouse, family or a friend! Revolutionized Wall Decals is the perfect alternative for conventional wallpaper (faux finishes and messy wallpaper glue) and you do not necessary have to re-paint your wall. Beyond Unlimited Imagination has hundreds of design that are sure to fit your theme and your style. With a quick peel and stick application, you are on your way to transform your dull walls to the main visual attraction in your premises

PHOTO GALLERY - PROJECT

MAKE OVER RESTAURANT

PROJECT : MADRASAH